Profile: Naai-Jung Shih

Home > Designer Profiles > Naai-Jung Shih
This is the public profile of Naai-Jung Shih, click here to view our interview with Naai-Jung Shih
Naai-Jung Shih of National Taiwan University of Science and Technology, Department of Architecture View Larger Image and Additional Photos of Naai-Jung Shih
About Naai-Jung Shih : on the verge of academics and professional practice, educator and designer; a translator on behalf of 3D scan and RP
STATEMENT OF ART:
Design is a journey of metaphor exploration and paradigm shift.

ORGANIZATION:
National Taiwan University of Science and Technology, Department of Architecture

NON-DESIGN OCCUPATION:
Education methods specialist Education, research, training

EDUCATION:
Master of Architecture, University of Michigan, School of Architecture and Urban Planning, 1985-1987
Doctor in Architecture, University of Michigan, School of Architecture and Urban Planning, 1987-1991

EXPERIENCE:
professor 1997-
visiting scholar, 2004.06-09, Stanford University
associate professor 1991-1997

PRIVATE EXHIBITIONS:
2015, RP installation show, Poan 84, Taipei

MIXED EXHIBITIONS:
1.2019 Joint Exhibition, 2019.03.07-28, NCKU Art Center, Tainan National Cheng Kong University, Tainan, Taiwan.
2.2018 Personal RP Exhibition, Department of Architecture, NTUST.
3.2016 Personal RP Show + 1st Year Student Design Fair Curator _part III, 2016, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=1148060728549614 。
4.2016 Personal RP Show part II, 2016, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=1145339008821786 。
5.2016 Personal RP Show, 2016, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=1136050499750637 。
6.2016 Personal RP Show, 2016, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=1133163736705980 。
7.2013 Personal RP Show + 1st Year Student Design Fair Curator Part II, 2013, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=669505813071777 。
8.2014 Personal RP Show + 1st Year Student Design Fair Curator, 2014, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=761204927235198

EVENTS:
1.2017 1st Year Student Design Fair Curator, 2018.01.15-02.15.
2.2017 1st Year Student Design Fair Curator, https://www.facebook.com/pg/admira.tw/photos/?tab=
album&album_id=1563608656994817 。
3.2015 1st Year Student Design Fair Curator, 2015, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=1049076685114686 。
4.2013 1st Year Student Design Fair Curator, 2013, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=658650824157276 。

AWARDS:
1.Platinum: Wood Storm, A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
2.Gold: Vapor Breeze, A Design Award in Arts, Crafts and Ready-Made Design Category, 2017 – 2018.
3.Gold: Missing Julie, A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
4.Gold: Falling Water, A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
5.Silver: Dancing Cubes, A Design Award in Arts, Crafts and Ready-Made Design Category, 2017 – 2018.
6.Silver: Billy Julie – Mask, A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
7.Silver: Eyelash Stand - Makeup Assistant, A Design Award in Winner in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
8.Silver: Ubiquitous Stand - Desktop Interactive Display Stand, A Design Award in Arts, Crafts and Ready-Made Design Category, 2015 – 2016.
9.Bronze: Sign Language, A Design Award in Arts, Crafts and Ready-Made Design Category, 2017 – 2018.
10.Bronze: Architectural Component, A Design Award in Arts, Crafts and Ready-Made Design Category, 2017 – 2018.
11.Bronze: Yulia Mariana, A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
12.Bronze: Soft Culture - Showroom, A Design Award in Winner in Spatial Design Category, 2016 – 2017.
13.Bronze: Hurricane - Desktop Lighting Installation, A Design Award in Winner in Lighting Products and Lighting Projects Design Category, 2016 – 2017.
14.Bronze: Life - Lighting Installation, A Design Award in in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
15.Bronze:A Design Award, A Dream - Tabletop Lighting Installation, A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
16.Iron: Umbrella Earth, A Design Award in Arts, Crafts and Ready-Made Design Category, 2017 – 2018.
17.Iron: Eyes, A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.
18.Iron: Conversations - , A Design Award in Arts, Crafts and Ready-Made Design Category, 2016 – 2017.

PRESS APPEARANCES:
Architecture Magazine Report, 2015, 7photos, Updated 1 year ago, https://www.facebook.com/519899381365755/photos/?t
ab=album&album_id=887855051236851 。

ACADEMIC PUBLICATIONS:
1.施乃中,"設計單位發展自動化策
略",技術學刊,Vol. 10, No. 2,第225-237頁,台北(1995)。
2.Shih, Naai-Jung, "A General Auto-indexing System for Managing Construction Drawings," Building and Environment, Vol. 30, No. 3, pp. 403-409, UK(1995). NSC 83-0415-E011-012 & 015 (SCI 2.131/2)
3.施乃中,"3D數位板在建築模擬之
用",技術學刊,Vol. 10, No.4,第429-435頁,台北(1995)。 NSC 82-0410-E011-098
4.施乃中,沈宗樺,"電腦輔助設計
在建築教學上之應用",建築學報
第14期,秋季號,第63-73頁,台北(199
5)。 NSC 84-2212-E011-032
5.Shih, Naai-Jung, "Modeling and Image-making as a Two-way Process in Architectural Design Studies," Journal of the Chinese Institute of Engineers, Vol. 19, No. 2, pp.287-297, ROC(1996). (SCI)
6.施乃中,王志祥,"自動化工具對
建築設計作業中資訊處理影響研究"
;,建築學報,第17 期,夏季號,第111-122頁,台北(1996)
。 NSC 83-0433-E011-055
7.Shih, Naai-Jung, "A Study of 2D- and 3D-oriented Architectural Drawing Production Methods, " Automation in Construction, Vol. 5, No. 4, pp. 273-283, USA(1996). (SCI 1.311/1.454, CONSTRU CTION &BUILDING TECHNOLOGY)
8.Shih, Naai-Jung and Shih, Wei-Der,〞Gesture Modeling for Architectural Design," Computers & Graphics, Vol. 20, No. 6, pp.848-862, UK(1996). (SCI 0.735/0.84)
9.Shih, Naai-Jung, "An Application Study of the CAD Tools in Architecture Basic Design," 設計學報, Vol. 1, No.1, summer, pp.67-84, Taipei(1996).
10.Shih, Naai-Jung and Lan, Wei-Jeh, “Incorporating a 3D Urban Environment Model between Government and Architectural Firms," Building Research and Information, Vol. 23, No. 1, pp. 18-24, 1997. (SCI 1.250/1.392, 9/53, CONSTRU CTION &BUILDING TECHNOLOGY)
11.Shih, Naai-Jung, "Conflict Resolution of Definitions between Conceptual Construction Components and CAAD Applications," Journal of the Chinese Institute of Engineering, Vol. 20, No. 2, pp.189-198, ROC (1997). (SCI)
12.Shih, Naai-Jung, "Auto-referencing of Notational Labels in Working Drawings," Automation in Construction, 5, pp. 469-482, USA(1997). NSC 84-2213-E011-058 (SCI 1.311/1.454)
13.Shih, Naai-Jung and Shen, Tsung-Hua "A Survey Study of Architectural Undergraduate CAD Education, " 建築學報, No. 21, summer, pp. 101-118, Taipei(1997). NSC 84-2212-E011-032
14.Shih, Naai-Jung, "Modeling Wall Finishes," Automation in Construction 6, pp. 139-146, USA(1997). (SCI 1.311/1.454)
15.施乃中,"設計資訊溝通與管理
式之建立-以平面設計為例",設計
學報,第17 期,夏季號,第111-122頁,台北(1997)

16.Shih, Naai-Jung, Wey-Chi Wu and Eric Yao, “The Development of DAZACAD - An Exploration of a Theoretical Building Model in Practice, “Building and Environment, Vol. 33, No. 4, pp. 209-217, UK(1998). (SCI 2.131/2)
17.Shih, Naai-Jung, Chiang, Wei-Hwa, and Su, Mei-Ting "An Operation Study of Design Collaboration between Architectural Designers and Consultants," 建築學報, No.27, pp. 103-117, Taipei (1998). NSC 85-2211-E-011-030
18.Naai-Jung Shih, Ching-Yuan Lin, and Chih-Hsiang Yang, “A Virtual Reality Based Feasibility Study of Evacuation Time Compared to the Traditional Calculation Method, “ Fire Safety Journal, 34 (2000), pp. 377-91 (2000). (SCI 1.017/1.229)
19.Shih, Naai-Jung, "Architectural Design Competition as a Data Integration Process," 建築學報, No. 33, pp.133-42 Taipei (July, 2000).
20.Shih, Naai-Jung and Huang, Yen-Shih, "A Study of Reflection Glare in Taipei," Building Research and Information, Vol. 29, Issue. 1, pp. 30-39, UK(2001). NSC 89-2211-E-011-020 and NSC 90-2211-E-011-016 (SCI 1.250/1.392)
21.Shih, Naai-Jung and Huang, Yen-Shih "An Analysis and Simulation of Curtain Wall Reflection Glare," Building and Environment, Vol. 36, No. 5, pp. 619-26, UK(June, 2001). NSC 89-2211-E-011-020 & NSC 90-2211-E-011-016 (SCI 2.131/2)
22.Shih, Naai-Jung and Huang, Yen-Shih "Volumetric Study of Reflection Glare from Glass Curtain Walls of Buildings," Journal of Architectural Engineering, Vol. 7, No. 3, pp. 87-93, USA(Sept. 2001). NSC 89-2211-E-011-020 and NSC 90-2211-E-011-016 (EI)
23.Shih, Naai-Jung and Tsai, Yu-Tun, “A photogrammetry-based verification of assumptions applied in the interpretation of paper architecture," Computers & Graphics, Vol. 26, issue 1, pp. 109-124, UK(2002). NSC 88-2516-S-011-001 (SCI 0.735/0.84)
24.Shih, Naai-Jung and Wang, Pin-Hung “Point-cloud-based comparison between construction schedule and as-built progress - a long-range 3D laser scanner’s approach," Journal of Architectural Engineering, Vol. 10, No. 3, pp. 98-102, USA (2004). (EI)
25.Naai-Jung Shih, “RP-aided computer modeling for architectural education,” Computers & Graphics, Vol. 30, Is. 1, pp. 137-144, UK (February 2006). (SCI 0.735/0.84) NSC 93-2211-E-011-025
26.Naai-Jung Shih and Sen-Tien Huang, “3D Scan Information Management System (3DSIMS) for Construction Management,” Journal of Construction Engineering and Management, Vol.132, Is.2, pp. 134-142, (2006.2). (SCI 0.676/1.209) NSC 91-2211-E-011-067
27.Shih N-J, Lai J-T and Tsai Y-L, “The application of a panorama image database management systems (PIDMS) for information integration on construction sites,” ITcon Vol. 11, pp. 641-654, http://www.itcon.org/2006/44, CIB (2006); Journal of Information Technology in Construction 11, 641-54. NSC 90-2211-E-011-041 91-2211-E-011-037, and 92-2211-E-011-029 (EI)
28.Shih, Naai-Jung, “RP-aided design in architectural studios,” Computer-Aided Design and Applications, Vol. 3, Nos. 1-4, pp. 31-40, 2006. (EI) NSC 94-2211-E-011-024
29.Naai-Jung Shih, Huey-Jiun Wang, Chen-Yan Lin, and Chai-Yuan Liau, “3D scan for the digital preservation of a historical temple in Taiwan,” Journal of Advances in Engineering Software, Vol. 38, Is. 7, pp. 501-512, July 2007. (SCI 1.004/1.112) NSC92-2422-H-011-013
30.施乃中、王惠君,“雷射3D攝影測量
運用於三峽祖師廟之建築藝術“,文
資產保存學刊,vol. 1, No.3, pp. 57-64, 2008。
31.Shih, N.-J., Lee, C.-Y., Jhan, S.-W., Wang, G.-S. and Jhao , Y.-F., “Digital Preservation of a Historical Building – the 3D as-built Scan of Don Nan-Kuan House,” Computer-Aided Design and Applications, Vol. 6, No. 4, pp 493-499, 2009. (EI)
32.Naai-Jung Shih, RP-aided visualization of movement-related digital forms, 創藝學報 JAD, 1期(2011/06/01), pp.81-91.
33.Naai-Jung Shih, Chia-Yu Lee, Shih-Wei Jhan, Guan-Syun Wang, Yong-Fong Jhao, “Digital Preservation of a Taiwanese Historical Settlement: Using 3D post-construction scan to develop an application framework and reference for Beipu Township,“Cities 28 (2011) 193–205 (SSCI 1.090/1.452, 5-Year Impact Factor: 1.548, 7/34, Urban).
34.Shih, N.J.; Lee, C.Y.; Jhan, S.W.; Wang, G.S.; Jhao, Y.F., “Three-dimensional scans of the Taipei commercial district,” Civil-Comp Proceedings, v 100, 2012, Proceedings of the 8th International Conference on Engineering Computational Technology, ECT 2012. (EI)
35.Shih, J., N., Lee, Y., C., Jan, I., T., Cheng, W., C., Lin, Q. & Chen X., R. Web presentation of 3D scanned sculptures - heritage preservation of Taiwanese arts, Global Journal on Technology (former AWERProcedia Information Technology & Computer Science), Vol 3 (2013), 1135-1140.
36.Naai-Jung Shih, Chia-Yu Lee, Tzu-Ying Chan, Shih-Cheng Tzen, ”The Integrated 3D As-Built Representation of Underground MRT Construction Sites,” Journal of Building Construction and Planning Research, 2013, 1, 153-162. http://dx.doi.org/10.4236/jbcpr.2013.14016 (NSC 98-2221-E-011-123-MY3)
37.Naai-Jung Shih, Shih-Cheng Tzen, Tzu-Ying Chan, Chia-Yu Lee, “Cross-Verification of As-Built Point Cloud and GIS-Related Map Data,” Open Journal of Civil Engineering, 2013, 3, 219-227. http://dx.doi.org/10.4236/ojce.2013.34026 (NSC 97-2221-E-011-162 and 98-2221-E-011- 123-MY3)
38.Naai-Jung Shih, Jan-Wey Cheng and Chie-Shan Cheng, An As-built Representation of An Urban Environment around a University Campus, Computer-Aided Design and Applications, Vol. 12, No. 2, 1-9 , 2015 (online 2014). (EI)
39.Naai-Jung Shih, Chia-Yu Lee, Qunnie Lin and Ruo-Xuan Chen, 3D Scans for Weather-damaged Sculptures, Computer-Aided Design and Applications, Vol.12, No.3, 270-281, 2015. (EI)
40.Naai-Jung Shih, Experiencing an Informal Dining Route through the 3D Scanned Data of Urban Fabric, International Journal of Civil, Structural, Environmental and Infrastructure Engineering Research and Development (IJCSEIERD), 6(3), 29-36, Jun 2016. (MOST 104-2221-E-011-131)
41.Jau, M.-L., & Shih, N.-J. (2017). The New Role of Instructors and Curators for the First-Year Architectural Design Students in Taiwan. Art and Design Review, 5, 44-51.
42.Naai-Jung Shih , Chin-Lin Lin, The Virtual 3D Representation of Old Street Culture of Jingtong, International Journal of Civil, Structural, Environmental and Infrastructure Engineering Research and Development (IJCSEIERD), 7(3), 47-54, 2017. (MOST 105-2221-E-011 -014 -MY2)
43.Ruo-Xuan Chen & Naai-Jung Shih (2017): Regenerating the arts: sculpture conservation and 3D panoramic guides at the Juming Museum, Taiwan, Journal of the Institute of Conservation, 40(3), 242-251. DOI: 10.1080/19455224.2017.1365741. (EI)
44.Naai-Jung Shih & Chen-Yang Lin, The Evolving Urban Fabric and Contour of Old Mountain Streets in Taiwan, Tourism Geographies, 21(1), 24-53. (MOST 105-2221-E-011-014-MY2) https://doi.org/10.1080/14616688.2017.1388437 (doi: 10.1080/14616688.2017.1388437). (SSCI, IF:2.068/2.890, rank:24/50, 53%-2017)
45.Naai-Jung Shih , Chien-Wei Chen & Shih-Cheng Tzeng (2018): The assessments of hierarchical 3D spatial data in an urban environment, Computer-Aided Design and Applications, 15(1), 147-155. (NSC 101-2221-E-011-160, NSC 102-2221-E-011-118-MY2 and MOST 104-2221-E-011-131) DOI: 10.1080/16864360.2017.1353746. (EI)
46.Naai-Jung Shih & Pei-Huang Diao (2018): The preservation of railroad-related cultural activities and subjects using 3D scans and photogrammetry, Computer-Aided Design and Applications, 15(1), 129-137. (MOST 105-2221-E-011-014-MY2) DOI: 10.1080/16864360.2017.1353735. (EI)
47.Pei-Huang Diao and Naai-Jung Shih, MARINS: A Mobile Smartphone AR System for Pathfinding in a Dark Environment, Sensors 2018, 18(10), 3442; https://doi.org/10.3390/s18103442 (doi:10.3390/s18103442).
48.Pei-Huang Diao and Naai-Jung Shih, BIM-Based AR Maintenance System (BARMS) as an Intelligent Instruction Platform for Complex Plumbing Facilities, Appl. Sci. 2019, 9(8), 1592. https://doi.org/10.3390/app9081592 (doi: 10.3390/app9081592).
49.Pei-Huang Diao and Naai-Jung Shih, Trends and research issues of AR studies in ACE education - a review of academic journal publications, Appl. Sci. 2019, 9(9):1840. https://doi.org/10.3390/app9091840 (doi: 10.3390/app9091840).
50.Naai-Jung Shih, Pei-Huang Diao, and Yi Chen, ARTS, an AR Tourism System, for the Integration of 3D Scanning and Smartphone AR in Cultural Heritage Tourism and Pedagogy, Sensors 2019, 19(17), 3725; https://doi.org/10.3390/s19173725 (doi:10.3390/s19173725).
51.Naai-Jung Shih, Wen-Tse Hsu, and Pei-Huang Diao, Point Cloud-Oriented Inspection of Old Street’s Sustainable Transformation from the Ceramic Industry to Cultural Tourism: A Case Study of Yingge, a Ceramic Town in Taiwan, Sustainability 2019, 11(17), 4749; doi:10.3390/su111747492019.
52.Naai-Jung Shih, Pei-Huang Diao and Wen-Tse Hsu, A Section-based Illustration of Old Street Fabric and 2nd Contour Using 3D Scan Data, Computer-Aided Design & Applications, 17(3), 2020, 598-606. doi: 10.14733/cadaps.2020.598-606

BOOKS:
Shih, Naai-Jung, “Data Representation and Production in Architecture Drafting and Modeling,” ISBN 0-9717179-0-7, 2002.
Shih, Naai-Jung, “3D Modeling from images to color-textured RP,” ISBN 0-9717179-1-5, 2002.

ACCOLADES:
teaching excellence, 2011
teaching excellence, 2017

LANGUAGE SKILLS:
Chinese Madrian
English

COMPUTER LITERACY:
Scenet®, 3D Reshaper®, Meshlab®, CloudCompare®, and Geomagic Studio®, Microjet®, Z-corp 406®

COURSES, SEMINARS AND WORKSHOPS::
The Application of 3D Scan in Architecture
Digital Form and Rapid Prototyping

SYMPOSIUMS AND ACADEMIC CONFERENCES::
1.施乃中,"設計單位發展自動化之
實施流程與管理,"第六屆全國自
化科技研討會論文集,自動化科技學
主辦,第7-11頁,台北(1993)。
2.Shih, Naai-Jung, "Architectural Modeling with a Three-dimensional Digitizer," 八十二年電子計算機於土木水利工程
用論文研討會論文集,中國土木水利
程學會電子計算機應用委員會主辦,
第39-45頁,台南(1993)。
3.施乃中,〞三度空間數位板應用研究
〞,第六屆建築研究成果發表會論文
,中華民國建築學會,第837-840頁,台
南(1993)。
4.Shih, Naai-Jung, "Spatial Modeling with a Three-dimensional Digitizer," ACSA (Association of Collegiate Schools of Architecture) Technology Conference, pp. 137-140, Ann Arbor, Michigan, USA (Jan. 1994). NSC 82-0410-E011-098
5.Shih, Naai-Jung, "Managing Construction Drawing Documents with an Automatic Index System," Automation and Robotics in Construction XI, Proceedings of the 11th International Symposium on Automation and Robotics in Construction (ISARC), England, Brighton, pp. 547-554, May 24-26, UK(1994).
6.施乃中、王志祥, "建築規劃設計自動化工具研究,&quo
t;中國工程師學會高雄分會八十三年度
聯合年會學術研討會論文專集,中工高
會刊,第1卷,第4期, pp. 168-175,高雄(June 3, 1994)。 NSC 83-0422-E011-055
7.施乃中、周武男,"建築規劃設計
單位發展自動化之資料模型設計," 中國工程師學會高雄分會八十三年度
合年會學術研討會論文專集,中工高雄
會刊,第1卷,第4期, pp. 160-167,高雄(June 3, 1994)。
8.施乃中、王斌弘,"影像處理與模
擬對電腦輔助建築設計之影響與探討,&
quot;營建自動化課程教學成果研討會論
文專集,教育部科技顧問室、中央大學
主辦),中國土木水利學會、內政部
建築研究所籌備處(協辦), pp. 299-310,中壢(June 1994)。
9.Shih, Naai-Jung, "Path-finding Strategy Using a Unified Obstacle Representation" The Third International Conference on Automation Technology, pp. 141-146, Taipei, Taiwan, July 7-9, 台北(1994).
10.施乃中,王斌弘,〞影像模擬與設
表達,〞第七屆建築研究成果發表會
文集,中華民國建築學會,第931-936
,台北(Nov. 26-27, 1994)。
11.施乃中,〞影像漸變在建築分析上
應用,〞第七屆建築研究成果發表會
文集,中華民國建築學會,第937-938
,台北(Nov. 26-27, 1994)。
12.施乃中,〞建築設計者與專業顧問
作作業研究,〞二十一世紀土木工程
育研討會,台灣大學土木學系所,第
177-184頁,Mar. 16-17, 台北(1995)。
13.施乃中,〞2D及3D資料對建築製圖影
研究,〞第十屆全國技術及職業教育
研討會,教育部技術及職業教育司,
159-165頁,Mar. 17-18, 台北(1995)。
14.施乃中,〞設計圖面索引系統研究
〞八十三年度工業工程學門研究計劃
果要覽論文專集,國科會工程處,第
227-232頁,Mar. 23, 中壢(1995)。 NSC 83-0415-E011-012
15.Shih, Naai-Jung, "CAD Environmental Setting for Architecture Design Studio,〞Proceedings of 1995 International Conference on Engineering Education, Ministry of Education / National Science Council / Tamkung University, pp.271-276, May 18-20, 台北(1995)。
16.施乃中,〞電腦輔助建築設計-三
空間電腦模擬,〞八十四會計年度營
自動化教學成果研討會論文專集,教
育部科技顧問室主辦、台大土木工程
究所協辦,第243-253頁,May 21, 台北(1995)。
17.施乃中,王志祥,〞自動化工具對
築設計資訊影響探討,〞第八屆全國
動化科技研討會Automation'95論文集
,中原大學、自動化科技學會主辦,
696-701頁,July 11-12, 中壢(1995)。
18.施乃中,〞設計資料溝通與管理模
之建立,〞第一屆設計與管理學術暨
物研討會論文集, 實踐管理學院、中華民國管理科學學
主辦,第261-272頁,May 26, 台北(1995)。
19.施乃中,藍偉哲〞都市設計實質環
模擬研究,〞八十四年電子計算機於
木水利工程應用論文研討會論文集,
中原大學、中國土木水利工程學會電
計算機應用委員會主辦,第897-906頁,
Oct. 6-7, 中壢(1995)。
20.施乃中,〞建築營造構件之理論與
物建構方式探討,〞八十四年電子計
機於土木水利工程應用論文研討會論
文集,中原大學、中國土木水利工程
會電子計算機應用委員會主辦,第71-8
2頁,Oct. 6-7, 中壢(1995)。
21. Shih, Naai-Jung and Shih, Woei-Der,〞An Imperical Study of Gesture Modeling for Architectural Design," The Proceeding of the 2nd Internatioal Conference on Computer-aided Design, National Chiou Tung University, pp. 90-103, Sept. 20, 新竹(1995).
22.施乃中,蘇美婷,〞合作式設計資
管理模式之建立,〞第七屆中華民國
理教育研討會論文集,成功大學、行
政院中華民國管理科學學會主辦,第35
3-360頁,Nov. 3-4, 台南(1995)。
23.施乃中,〞灰階影像至3D幾何體之轉
換,〞第八屆建築研究成果發表會論
集,中華民國建築學會,第985-988頁,
Nov. 27, 台北(1995)。
24.施乃中,施偉德,〞肢體語言輔助
築3D電腦模擬之初步探討,〞第八屆
築研究成果發表會論文集,中華民國
築學會,第989-994頁,Nov.27, 台北(1995)。
25.邱茂林,施乃中,施宣光,江維華
〞合作式電腦輔助建築設計之架構與
驗,〞第八屆建築研究成果發表會論
文集,中華民國建築學會,第1001-1006
,Nov.27, 台北(1995)。
26.施乃中,〞建築模擬與細部表達-
階影像與3D幾何體間之轉換,〞營建
訊,152期,財團法人台灣營建研究中
,第32-39頁,台北(May 1995)。
27.施乃中,〞建築圖面之錯誤控制管
,〞第十一屆全國技術及職業教育研
會,教育部技術及職業教育司,第71-
76頁,Mar. 15-16, 高雄(1996)。
28.施乃中,〞電腦輔助建築基本設計
究,〞第二屆設計與管理學術暨實物
討會論文集, 實踐管理學院、中華民國管理科學學
主辦,第 87-98 頁,May 31, 台北(1996)。
29.Shih, Naai-Jung,〞Simulating Construction Process with an Animation," Automation and Robotics in Construction XII, Proceedings of the 12th International Symposium on Automation and Robotics in Construction (ISARC 12), Tokyo, Japan, pp.405-410, Japan (June 11-13, 1996).
30.Shih, Naai-Jung,〞A Study of Automatic Drawing Management and Production System," Proceedings of the 4th International Conference on Automation Technology, pp. 221-8, Mechanical Industry Research Laboratories / ITRI, Hsinchu, Taiwan, July 8-11, 新竹(1996).
31.Shih, Naai-Jung, "A Study of Computer-aided Basic Design in Architecture," The 8th International Conference on System Research, Informatics and Cybernetics, Preconference Proceedings of Advances in Cooperative Environment Design Systems, pp. 21-30, Baden-Baden, Germany (Aug. 1996).
32.Shih, Naai-Jung, " Automatic Reference of Notational Labels," The 8th International Conference on System Research, Informatics and Cybernetics, Baden-Baden, Germany, (Aug. 14-18, 1996). NSC 84-2213-E011-058
33.Shih, Naai-Jung, "Modeling Wall Finishes," G.E.George (ed.), Research-in-Progress: Advances in Interdisciplinary Studies, Vol. IV, pp. 50-54, USA(1996).
34.邱茂林,施乃中,施宣光,〞合作
電腦輔助建築設計之實驗與回顧,〞
九屆建築研究成果發表會論文集,中
華民國建築學會,第641-644頁,台北(N
ov.27, 1996)。NSC 85-2211-E006-027
35.施乃中,蘇美婷〞合作式建築設計
電腦輔助合作作業之研究,〞第九屆
築研究成果發表會論文集,中華民國
建築學會,第653-656頁,台北(Nov.24, 1996)。
36.施乃中,蘇美婷〞合作式建築設計
通與合作模式研究,〞第九屆建築研
成果發表會論文集,中華民國建築學
會,第657-660頁,台北(Nov.24, 1996)。
37.施乃中,沈宗樺〞國內建築系大學
電腦輔助設計課程之調查研究,〞第
二屆全國技術及職業教育研討會,教
育部技術及職業教育司,第223-232頁,
北(April, 1997)。 NSC 84-2211-E011-032
38.Shih, Naai-Jung, "Image Morphing for Architectural Visual Studies," CAADRIA'97: Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia, April 17-19, 1997, National Chioa Tung University, pp. 397-406, 新竹(1997).
39.施乃中,許偉勳〞電腦輔助建築基
設計試作研究,〞1997基本設計討會論
文集, 中華民國設計學會主辦,私立朝陽技
學院,第 D17-23 頁,May 3, 台中(1997)。
40.Shih, Naai-Jung and Lan, Wei-Jeh,〞Incorporating a 3D Urban Environment Model between Government and Architectural Firms," Fourteenth International Symposium on Automation and Robotics in Construction, Proceedings of the 14th International Symposium on Automation and Robotics in Construction (ISARC 14), Pittsburgh, Pennsylvania, USA, pp.160-5, June 8-11, USA(1997).
41.Shih, Naai-Jung, "Authoring of VR Media Clips as a Tool to Manage and Present Design Information," InterSymp-97, The 9th International Conference on System Research, Informatics and Cybernetics, Preconference Proceedings of Advances in Cooperative Environment Design Systems, pp. 127-134, Baden-Baden, Germany (Aug. 1997).
42.Shih, Naai-Jung and Yan, Chie-Shan,〞A Study of the Fire Egress Signs by VR Simulation," Ed. R. Junge, Proceedings of the 7th International Conference on Computer Aided Architectural Design Futures (CAD Future '97), pp.311-16, Kluwer Academic Publishers, Munich, Germany (4-6 August, 1997).
43.Shih, Naai-Jung, "Operation of Geometric Definitions between Architecture Components," Proceedings of the 7th International Conference on Computing in Civil and Building Engineering, Vol. 1, pp. 653-658 , 19-21 Aug. 1997, Seoul, Korea (1997).
44.Shih, Naai-Jung, "Data Consistency and Manipulation Consisyency of 3D- and 2D-oriented Architecture Drawing Production Methods," Proceedings of the 7th International Conference on Computing in Civil and Building Engineering, Vol. 1, pp 665-670, 19-21 Aug. 1997, Seoul, Korea (1997).
45.施乃中、楊致祥,〞虛擬實境技術
防火逃生路徑動態模擬之應用,〞八
六年電子計算機於土木水利工程應用
論文研討會論文集,交通大學、中國
木水利工程學會電子計算機應用委員
主辦,第235-246頁,新竹(Oct. 16-17, 1997)。
46.施乃中、施宣光、邱尚孝,〞虛擬
境技術在建築上之應用研究,〞八十
年電子計算機於土木水利工程應用論
文研討會論文集,交通大學、中國土
水利工程學會電子計算機應用委員會
辦,第247-256頁,新竹(Oct. 16-17, 1997)。
47.施乃中、許偉勳,〞電腦輔助建築
本設計試作研究,〞第十屆建築研究
果發表會論文集,中華民國建築學會
,第673-676頁,國立台灣科技大學,台
(Nov.23, 1997)。
48.施乃中、許偉勳,〞CAD在建築基本
計教育應用之探討,〞第十屆建築研
成果發表會論文集,中華民國建築學
會,第677-680頁,國立台灣科技大學,
北(Nov.23, 1997)。
49.施乃中、張肇丞、許世明,〞CAAD工
在建築圖面表現之調查分析,〞第十
三屆全國技術及職業教育研討會,教
部技術及職業教育司,第11-17頁,台
(May 5, 1998)。
50.施乃中、張肇丞,〞都市建築景觀
像中共同屬性之電腦分析,〞Design for the Future,第三屆全國設計【學術研究成
】研討會論文集,中華民國設計學會
第339-334頁,台南(June 5-6, 1998)。
51.施乃中、張肇丞、許世明,〞電腦
都市意象分析上之應用-以捷運木柵線
為例,〞1998設計論文研討會論文集,
傳大學設計學院,第1-6頁,桃園(Jun
e 1998)。NSC87-2211-E-011-004
52.Shih, Naai-Jung, "The Application of A Link System in Architectural Design and Analysis," Proceedings of the Third Asia Design Conference, Chinese Institute of Design, Vol. 1, pp. 69-72, Oct. 17-18 1998, Chaoyang Univ. of Technology, Taiwan (1998).
53.Shih, Naai-Jung, "The Application of Link System in Open Building Design and Analysis," Proceedings of the 1998 International Symposium on Open Building, Architectural Institute of the Republic of China, pp. 65-72, Nov. 1, 1998, National Taiwan University of Science and Technology, Taipei, Taiwan (1998).
54.Naai-Jung Shih and Chih-Hsiang Yang, “A Feasibility Study on Virtual Reality Based Evacuation Time Compared to a Traditional Calculation Method, “ Proceedings of PaPER ’98, The 11th International Conference on People and Physical Environment Research, pp. 333-9, Sydney, Australia (1998).
55.施乃中、楊致祥,〞公共空間避難
生之虛擬實境研究,〞第十一屆建築
究成果發表會論文集,中華民國建築
學會,第265-70頁,朝陽科技大學,霧
(Dec. 20, 1998)。
56.施乃中、許世明,〞高視點捷運沿
都市意象之視覺經驗探討,〞第十一
建築研究成果發表會論文集,中華民
國建築學會,第265-70頁,朝陽科技大
,霧峰(Dec. 20, 1998)。
57.施乃中、蔡於暾,〞紙上建築設計
念之初步分析與模擬,〞跨世紀國際
術研討會,設計組,主辦單位:銘傳
大學,第1-10頁,台北(March 12-13, 1999)。
58.施乃中、張肇丞,〞影像濾鏡在建
設計分析過程的應用,〞第八屆國際
腦輔助教學研討會,大會論文摘要集
,指導單位:教育部、國科會,主辦
位:逢甲大學、中華民國電腦輔助教
學會,第151頁,台中(March 18-20, 1999)。
59.Shih, Naai-Jung & Yang, Chih-Hsiang, "A VR-based Preference Study on the Selection of Egress Route in Evacuation," CAADRIA'99: Proceedings of the Fourth Conference on Computer Aided Architectural Design Research in Asia, May 5-7, Tongji University, pp. 63-70, Shanghai (May 5-7, 1999).
60.施乃中、黃嚴仕,〞電腦輔助都市
幕牆光害模擬,〞第十四屆全國技術
職業教育研討會,教育部技術及職業
教育司,工業類:土木建築組,第17-25
頁,台南(May 7-8, 1999)。
61.施乃中,〞Escher “Ascending and Descending”一圖之解釋與模擬,〞第十
屆全國技術及職業教育研討會,教育
部技術及職業教育司,工業類:土木
築組,第27-36頁,台南(May 7-8, 1999)。
62.施乃中、張肇丞,〞都市景觀之視
結構探討,〞第四屆設計學術研究成
研討會論文集,中華民國設計學會,
第13-16頁,大同工學院工業設計系,台
北(May 29, 1999)。
63.施乃中、張聖志,〞建築物夜間裝
照明之設計操作手法研究,〞1999設計
論文研討會論文集,銘傳大學設計學
,第123-129頁,桃園(June, 1999)。
64.Shih, Naai-Jung & Huang, Yen-Shih, "An Analysis and Simulation of Curtain Wall Reflection Glare," Proceedings of the 17th Conference of eCAADe, pp. 744-50, Sept. 15-18, 1999, The University of Liverpool, UK (1999).
65.施乃中、蔡於暾,〞幻想建築之正
電腦模擬研究,〞八十八年電子計算
於土木水利工程應用論文研討會論文
集,中興大學、中國土木水利工程學
電子計算機應用委員會主辦,第1364-13
73頁,台中(Feb. 17-18, 2000)。
66.施乃中、張聖志,〞建築夜間裝飾
明設計手法與電腦模擬之研究,〞八
八年電子計算機於土木水利工程應用
論文研討會論文集,中興大學、中國
木水利工程學會電子計算機應用委員
主辦,第1476-1486頁,台中(Feb. 17-18, 2000)。
67.施乃中、黃嚴仕,〞電腦輔助都市
幕牆反射日照障害之研究,〞八十八
電子計算機於土木水利工程應用論文
研討會論文集,中興大學、中國土木
利工程學會電子計算機應用委員會主
,第1487-1496頁,台中(Feb. 17-18, 2000)。
68.施乃中,〞建築設計簡報中病理案
之初探,〞第十二屆建築研究成果發
會論文集,中華民國建築學會,第909
-920頁,中國工商專校,台北(April 16, 2000)。
69.施乃中、劉育良、賴仁達,〞地震
像資訊整合研究,〞第十二屆建築研
成果發表會論文集,中華民國建築學
會,第921-924頁,中國工商專校,台北
April 16, 2000)。
70.施乃中、劉育良,〞空間圖像認知
研究,〞第五屆設計學術研究成果研
會論文集,中華民國設計學會,第709
-714頁,大葉大學,員林(May 6-7, 2000)。
71.施乃中,”A Preliminary Study of Pathological Cases in Architectural Design Presentation,”第十五屆全國技術及職
教育研討會,教育部技術及職業教育
,工業類:土木建築組,第72-80頁,
中(May 7-8, 2000)。
72.Shih, Naai-Jung, "Architectural Design Competition as a Drafting Automation Process," Automation 2000: Proceedings of the 6th International Conference on Automation Technology, May 9-11, 2000, National Taiwan University of Science and Technology and SME, pp. 1027-1032, Taipei (May 9-10, 2000).
73.Shih, Naai-Jung, and Tsai, Yu-Tun, "A photogrammetry and perception study of Chernikhov Fantasy no. 32 and 38," CAADRIA2000: Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia, May 18-19, 2000, National University of Singapore, pp. 461-470, Singapore (May 18-19, 2000).
74.施乃中、彭雲宏,〞台灣科大建築
外教學,〞第一屆技專校院與校外學
型組織建立夥伴關係國際研討會論文
集,教育部主辦,國立雲林科技大學
辦,pp. 183-190(May 17-18, 2000)。
75.Shih, Naai-Jung, and Tsai, Yu-Tun, "A Computer-aided Study of Cartesian and Photogrammetry Modeling of Paper Architecture," Proceedings of the 8th International Conference on Computing in Civil and Building Engineering, Vol. 1, pp. 201-8, ICCCBE-VIII, August 14-17, 2000, Stanford University (2000). (EI)
76.Shih, Naai-Jung, and Huang, Yen-Shih , "The Computer-aided Visualization of Curtain Wall Reflection Glare," Proceedings of the 8th International Conference on Computing in Civil and Building Engineering, Vol. 2, pp. 1574-81, ICCCBE-VIII, August 14-17, 2000, Stanford University (2000). (EI)
77.Shih, Naai-Jung, “An Application of Virtual Reality Formats in Managing Visual Information of Earthquake Damaged Sites," Proceedings of the 17th International Symposium on Automation and Robotics in Construction (ISARC 17), Taipei, Taiwan, ROC, pp. 203-8, Sep. 18-20 (2000).
78.施乃中,”Computer-aided Photostudio Design (電腦輔助照相館設計),”第十六屆全
國技術及職業教育研討會,教育部技
及職業教育司,工業類:土木建築組
第173-9頁,花蓮(April, 2001)。
79.施乃中,賴仁達,〞照相測量法於
築古蹟數位量測之應用,〞第十二屆
國自動化科技研討會論文集,虎尾技
術學院、自動化科技學會主辦,機器
覺與影像處理(一),4401A-2,May 25-26, 雲林虎尾(2001)。
80.Naai-Jung Shih, Yau-Liang Tsai, Daniel Lai, and Ho-Yu Chang, "A Preliminary Application of Panoramic Supervision System in Construction Site," Proceedings of the 2001 Information Visualization, pp. 103-8, July 25-27, 2001, London, England (2001). (EI)
81.Naai-Jung Shih, Yau-Liang Tsai, Daniel Lai, and Ho-Yu Chang, " An Application of Panoramic Site Supervision System in Interior Remodeling," Proceedings of the 19th Conference of eCAADe, pp. 47-53, August. 29-31, 2001, Helsinki, Finland (2001).
82.Naai-Jung Shih, "A Structure Analysis of Earthquake Damaged Building by Applying Photogrammetry Reconstruction Method," Proceedings of the 7th International Conference on Inspection, Appraisal, Repairs and Maintenance of Buildings and Structures, pp. 953-600, Sept. 11-13, 2001, Nottingham, UK (2001).
83.施乃中,〞自然及人為災害中外力
建築構造破壞間互動模擬,〞第十三
建築研究成果發表會論文集,中華民
國建築學會,第71頁,正修、高苑技術
學院建築工程系、成功大學建築系(No
v. 24, 2001)。
84.王斌弘、施乃中,”3D物件辨識在建
築工程生產行為之運用與發展,”中
民國建築學會第十三屆建築研究成果
表會,高雄,台灣, pp.1185-1190(2001)。
85.Shih, Naai-Jung, and Lai, Jen-Ta, "A comparison study of traditional and photogrammetry modeling of historical architectural components," Proceedings of the 9th International Conference on Computing in Civil and Building Engineering, Vol., pp. 253-8, ICCCBE-IX, April 3-4, 2002, Taipei, National Taiwan University (2002).
86.Shih, Naai-Jung, Tsai, Yau-Liang and Lai, Jen-Ta, "An application study of the panorama video camera: hypercam," Proceedings of the 9th International Conference on Computing in Civil and Building Engineering, pp.273-8, ICCCBE-IX, April 3-4, 2002, Taipei, National Taiwan University (2002).
87.施乃中,” 建築設計協同作業之支授性數位設計
具研究,”第十七屆全國技術及職業
育研討會,教育部技術及職業教育司
,工業類:土木建築組,第1785-1794頁
屏東科技大學(April, 2002)。
88.Shih, Naai-Jung; Huang, Yen-Shih; Tsai, Yu-Tun; Lia, Jen-Ta, “The Application of Photogrammetry in Architectural Studies,” Proceedings of 90th ACSA (Association of Collegiate Schools of Architecture) Annual Meeting: Architecture in communication – challenge and opportunity in building the information age, pp. 445-451, New Orleans, USA (April.11-14, 2002).
89.Shih, Naai-Jung, “An Application of a 3D Scanner in the Representation of Building Construction Site," Nineteenth International Symposium on Automation and Robotics in Construction, Proceedings of the 19th International Symposium on Automation and Robotics in Construction (ISARC 19), NIST, Washington DC, USA, pp. 337-342, Sep. 23-25 (2002).
90.Wang, Pin-hung and Shih, Naai-Jung, "A preliminary application of a PDA-based OODB system for construction information management," Proceedings of the 20th Conference of eCAADe, pp. 306-9, 200, Warsaw, Poland (2002).
91.Shih, Naai-Jung and Wang, Pin-hung, "The Application of Reverse Engineering for Building Construction Management," Proceedings of the 20th Conference of eCAADe, pp. 338-341, 200, Warsaw, Poland (2002).
92.施乃中、王斌弘,”3D立體掃描在建
築上之運用與發展,”虛擬實境應用
例研討會,台北,台灣,pp3-1-45(2003

93.施乃中,〞3D立體顯示器在建築設計
溝通協調上之應用,〞第十四屆建築
究成果發表會論文集,中華民國建築
會,第H1-1頁,淡江大學建築系(Nov. 24, 2002)。
94.王斌弘、施乃中,〞行動裝置在建
工程施工監控上之運用,〞第十四屆
築研究成果發表會論文集,中華民國
建築學會,第H11-4頁,淡江大學建築系
(Nov. 24, 2002)。
95.施乃中、王斌弘,〞3D點雲與電腦模
型在建築結構工程進度查核上之研究
探,〞台灣科技大學、92年電子計算
於土木水利工程應用研討會論文摘要
第1-5頁,台北(July. 11-2, 2002)。
96.蘇晉暉、施乃中,〞結合3D應用軟體
及遠端控制進行無人自走車操控模擬
初探,〞台灣科技大學、92年電子計
機於土木水利工程應用研討會論文摘
,第28頁,台北(July. 11-2, 2002)。
97.施乃中、李文鎊,〞火災生成粒子
動性視覺模擬之初探,〞台灣科技大
、92年電子計算機於土木水利工程應
研討會論文摘要,第41頁,台北(July
. 11-2, 2002)。
98.Shih, Naai-Jung, “A RP system for the substantiation of architectural design interaction” 7th international Conference on Information visualization (IV03), IEEE Computer Society, July 16-18, London, England. (2003) (EI)
99.Shih, Naai-Jung, "The Application of Color-image-mapped Rapid Prototyping in Architectural 3D Modeling (Rapid prototyping for the substantiation of architectural design interaction)," Proceedings of the 21st Conference of eCAADe, pp. 347-350, Graz, Austria (2003).
100.Shih, Naai-Jung, “The application of an ASD in Design and Construction” ISARC2003, pp. 377-382, Sept. 22-25, Eindhoven, The Netherlands (2003).
101.Shih, Naai-Jung, “A Construction Site in a Scan-based Digital Representation,” CAAD Future 2003, pp. 423-432, NCKU, Tainan, Taiwan, ROC (April 2003).
102.Shih, Naai-Jung, “Digital architecture - What would 6000 points turn out to be?” ACADIA22 Conference 2003, pp.67-73, Ball State University, Indianapolis, Indiana, USA. (Oct. 23-26, 2003).
103.Shih, Naai-Jung and Chen, Hsin-Hung, “Displacement monitoring at building construction site” the 16th International Conference on Computer Applications in Industry and Engineering (CAINE03), pp. 208-210, Las Vegas, Nevada, USA. (Nov. 11-13, 2003).
104.施乃中,〞大型歷史建築文物保存
〞2003年文化資產保存科學學術研討
,第165-175頁,雲林科技大學,雲林(
Oct. 30-31, 2003)。
105.施乃中、林承陽,〞大型歷史建築
物數位保存,〞2003年數位內容創意
值研討會,論文集II – 海報展論文,第26-36頁,國科會,台灣
大學思亮館(Nov. 19, 2003)。
106.施乃中、王斌弘,〞3D 點雲對鋼骨工程施工精度與變位之檢
研究,〞第十五屆建築研究成果發表
論文集,中華民國建築學會,第H1-1-5
頁,逢甲大學建築系(Dec. 6, 2003)。
107.王斌弘、施乃中,〞行動裝置即時
像在建築工程管理上之運用,〞第十
五屆建築研究成果發表會論文集,中
民國建築學會,第H9-1-4頁,逢甲大學
築系(Dec. 6, 2003)。
108.施乃中、蘇晉暉,〞結合LEGO 機器人及3D 應用軟體進行空間動線模擬之初探,
第十五屆建築研究成果發表會論文集
中華民國建築學會,第H2-1-6頁,逢甲
大學建築系(Dec. 6, 2003)。
109.Shih, N. J. and Wang, P. H., “Study on construction inaccuracies between point-cloud and building construction models,” Proceedings of the 9th international conference on computer-aided architecture design research in Aria (CAADRIA2004), Seoul, Korea, pp 623-632, 28-30 (April, 2004).
110.Shih, N. J. and Su, C. H., “Manipulation of an automatic guided vehicle with 3D software and remote control,” Proceedings of the 9th international conference on computer-aided architecture design research in Aria (CAADRIA2004), Seoul, Korea, pp 927-936, 28-30 (April, 2004).
111.王斌弘、施乃中,”利用空間點雲
建建築管線竣工圖,”中華民國建築
學會第十六屆建築研究成果發表會,
北,台灣,pp33-36(2004)。
112.Shih, N. J. and Wang, P. H., “Plumbing locator in an as-built building forms, ” ARCOM2004, 1-3 Sept., Edinburgh, UK, pp.267-275 (2004).
113.Shih, Naai-Jung and Su, Chin-Hui, “Combine 3D Software and Remote Control to Progress Operating Simulation of Automatic Guided Vehicles,” eCAADe2004, pp.128-134, Sep., Copenhagen, Denmark (2004).
114.Shih, Naai-Jung, “A 3D Information System for the Digital Preservation of Historical Architecture,” eCAADe2004, pp.630-7, Sep., Copenhagen, Denmark (2004).
115.Shih, N. J. and Wang, P. H., “Using point cloud to inspect the construction quality of wall finish,” eCAADe2004, pp.573-8, Sep., Copenhagen, Denmark (2004).
116.Shih, N. J. and Wang, P. H., “As-built point cloud review of a ceiling plumbing system,” ISARC2004, pp. 22-24, Sept., Jeju, Korea, pp. 548-552 (2004).
117.Shih, Naai-Jung and Wu, Ming-Chang, “A 3D Point-cloud-based Verification of As-built Construction Process,” CAAD Future 2005 – Learning from the past, pp. 193-202, Vienna University of Technology, Vienna, Austria (June 2005).
118.Naai-Jung Shih, “RP-aided production of physical models from frozen dynamic sequences,” Proceedings of the 2005 Information Visualization, pp. 287-290, July 6-8, 2005, London, England (2005). NSC93-2211E-011-025 (EI)
119.Shih, Naai-Jung, “RP-Aided Design in Architectural Studio” the 18th International Conference on Computer Applications in Industry and Engineering (CAINE05), pp. 238-243, Hawaii, USA. (Nov. 9-11, 2005). (EI)
120.Shih, N. J. and Wang, P. H., 2006, Visualization management and inspection for plumbing construction quality control, ASCAAD 2006, 25-27 April, Sharjah, U.A.E., pp.393-404.
121.Shih, N. J. & Wang, P. H. (2006) Using Point Cloud with GIS and Virtual Reality to Manage and Inspect Building Plumbing. IN SHANNON, S., SOEBARTO, V. & WILLIAMSON, T. (Eds.) 40th Annual Conference of the Architectural Science Association ANZAScA - Challenges for Architectural Science in Changing Climates. Adelaide, Australia, The University of Adelaide and The Architectural Science Association ANZAScA, November 2006, pp 174-179.
122.Naai-Jung Shih, Huey-Jiun Wang, “3D scan for the digital preservation of a historical temple in Taiwan – 3D Scan for the Digital Preservation of a Historical Temple in Taiwan,” Proceedings of the 2007 International Conference on Digital Applications in Cultural Heritage (DACH2007), The National Center for Research and Preservation of Cultural Properties, pp. 459-74, Tainan, Jan, 12-2-4, 2007.
123.Naai-Jung Shih and Je-Zen Hu, “The Application of 3D Range Images in the Interior Design Data Management,” 16th International Conference on Software Engineering and Data Engineering (SEDE-2007), pp. 282-7, Las Vegas, USA, July 9-11, 2007. (EI)
124.Naai-Jung Shih, Je-Zen Hu, "The Application of 3D range images in the interior design practice," iv, pp. 825-830, 11th International Conference Information Visualization (IV '07), London, English, 2007. (EI)
125.Naai-Jung Shih, “The construction of as-built digital urbanscape - from building components to a city,” Remote Sensing for Environmental Monitoring, GIS Applications, and Geology VII, Proceedings of SPIE, Vol. 6749, pp. 67490W-1 - 9, Florence, Italy, Sept. 17-24, 2007. (EI)
126.Shih, N.J., “3D scan and RP for the as-built data collection and related design studies in a city,” Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping, p 731-737, 2007. (EI)
127.施乃中,”3D掃瞄與RP在建築上之應
用”,營建資訊及知識視覺化研討會
pp.,中華營建資訊標準協會,2007.10.23

128.施乃中,” 雷射3D攝影測量運用於三峽祖師廟之建
築藝術”,2008數位文化資產研討會,p
p.211-32,文建會,2008.11.21。
129.施乃中,” 3D掃瞄在建築上之應用”,2008數位文
資產研討會,pp.77-92,文建會,2008.11.
22。
130.Naai-Jung Shih, “3D Scans of As-built Urban Scenes in a City Scale,” Building Communication, 2009 Design Communication Conference, Southern Polytechnic State University, Atlanta, Georgia, 2009.3.25-28.
131.Naai-Jung Shih, “3D Scans of As-built Urban Scenes in a City Scale,” 2009 Taiwan CAADRIA: Proceedings of the fourteenth Conference on Computer Aided Architectural Design Research in Asia, April 22-25, 2009, National Chioa Tung University, pp. 297-306, 雲林,2009. (EI )
132.N.-J. Shih, C.-Y. Lee, S.-W. Jhan, G.-S. Wang and Y.-F. Jhao (2009). Digital Preservation of a Historical Building – the 3D as-built Scan of Don Nan-Kuan House. Computer-Aided Design and Applications, 6 (4), Reno, USA, 2009.6.8-12, pp. 493-499.
133.施乃中、李家宇、詹世偉、談宜芳
毛犖,”雷射3D掃瞄運用於齊東街日
宿舍及環境之數位保存,”古蹟暨歷
史建築保存科技研討會論文集,內政
建築研究所、中國科技大學,pp.13-22
2009。
134.N. J. Shih, C.Y. Lee, S.W. Jhan, G.S. Wang, & Y.F. Jhao, 3D Scans of As-built Street Scenes in Taipei, CAINE-2009, ISCA, San Francisco, pp. 36-41, 2009.11.4-6. (EI )
135.施乃中, 李家宇, 詹世偉, 王冠勛, 趙永豐, (2009). 雷射3D掃瞄運用於歷史建築數位化保存
. 第十二屆文化資產保存、再利用與保
科學國際研討會,文建會,正修科技
學,高雄,pp. ,2009.11.7-9。
136.施乃中, 王惠君, 李家宇, (2009). 3D雷射掃瞄在竹東建築數位典藏之應用
. 中華民國建築學會第21屆第2次建築研
成果發表會論文集. 台南: 中華民國建築學會,p 179,2009.5.23。
137.N. J. Shih, C.Y. Lee, Using 3D scan and web page information system to record urban environment – a study of Taipei street (3D雷射掃描及網頁資訊系統運用於都
環境記錄-以台北市街道為例), 2010 International Conference on Remote Sensing (ICRS), Hangzhou, China, Oct. 5-6, 2010, pp.342-5.
138.N. J. Shih (2011) RP-Aided Visualization of Movement-Related Digital Forms, 實虛整合之創新原型學術研討會,東
大學,pp19-27,2011.1.4。
139.N. J. Shih, C.Y. Lee, and T.Y. Chan, “3D scans of as-built street scenes for virtual environments,” Building Communication, 2011 Symposium on Simulation for Architecture & Urban Design (SimAUD '11), The Society for Modeling & Simulation International(SCS), Proceedings of the 2011 Symposium on Simulation for Architecture and Urban Design, pp. 46-51, Marriott Long Wharf Hotel, Boston, Massachusetts, 2011.4.4-6.

140.N. J. Shih, C.Y. Lee, and T.Y. Chan, Y.H. Yang, T.Y. Chan, S.C. Tzeng, “3D Scans of As-built Historical Street Scenes in Tamsui,” 27th International Conference on Computers and Their Applications (CATA-2012), International Society for Computers and Their Applications, Imperial Palace Hotel, Las Vegas, Nevada, USA, 2012.3.11-14. (EI – Scopus)
141.施乃中, 李家宇, “幾何體導向與影像導向三維數位保
在朱銘雕塑記錄上之應用(The Application of Geometry-based and Image-based 3D Digital Preservation of Ju Ming Sculptures)”,2012數位文化資產保存國
研討會(The 2012 International Conference on Digital Applications in Cultural Heritage),台中,文建會,2012.5.8-9,pp17
5-181。
142.N.J. Shih, C.Y. Lee, S.W. Jhan, G.S. Wang and Y.F. Jhao , “Three-Dimensional Scans of the Taipei Commercial District,” Proceedings of the Eighth International Conference on Engineering Computational Technology, B.H.V. Topping, (Editor), Civil-Comp Press, Dubrovnik, Croatia, 4-7 September 2012. (EI – Scopus)
143.Naai-Jung Shih, Chia-Yu Lee, Tsu-In Jan, Chan-Wei Cheng, Queenie Lin, Ruo-Xuan Chen, “Web Presentation of 3D Scanned Sculptures - heritage preservation of Taiwanese arts,” 3rd World Conference on Information Technology (WCIT 2012), CD-ROM, Barcelona, Spain, 14-16 Nov. 2012.
144.Naai-Jung Shih, Chia-Yu Lee, Tsu-In Jan, Chan-Wei Cheng, Queenie Lin, Ruo-Xuan Chen, “Digital Preservation of Ju Ming Stone Sculpture in Taiwan - the documentation and regeneraition of arts,” PostDigital Art, Proceedings of the 3rd Computer Art Congress (CAC3), Paris, France, 26-28 Nov. 2012.
145.施乃中,“石雕的3D保存與相關操作
,朱銘美術館石雕藝術與自然教育推
廣講座,新台市,金山朱銘美術館修
與保存中心,2012.5.8-9,pp19-74。
146.N.J. Shih and M.C. Hsieh, The simulation and evaluation of urban design principles for buildings in a Taipei financial corridor based on as-built 3D scan data, 2014 International Conference on Civil, Urban and Environmental Engineering (CUEE2014), pp. 243-9. (EI) (NSC 102-2221-E-011 -118 -MY2) (EI – Scopus)
147.Naai-Jung Shih, Jan-Wey Cheng and Chie-Shan Cheng, An As-built Representation of An Urban Environment around a University Campus, CAD 2014 Hong Kong, also Computer-Aided Design and Applications, Vol. 12, No. 2, pp. 1-9 , 2015 (online 2014). (EI)
148.Naai-Jung Shih, Chia-Yu Lee, Qunnie Lin and Ruo-Xuan Chen, 3D Scans for Weather-damaged Sculptures, CAD 2014 Hong Kong, also Computer-Aided Design and Applications, Vol.12, No.3, pp.1-12, 2015. (EI)
149.施乃中,學習體驗與出走校園-台灣
科技大學建築設計系設計教學,台灣
築學會會刊雜誌,台灣建築學會,77
22-28,2015.01
150.Naai-Jung Shih and Chie-Shan Cheng, 3D Scan for the As-built Urban Fabrics, 3rd Annual International Conference on Architecture and Civil Engineering (ACE 2015), Singapore, 2015.4.13-14. (DOI: 10.5176/2301-394X_ACE15.103)
151.Naai-Jung Shih, The Application of Photogrammetry in Street Façade Reconstruction, 5th International Conference on Engineering and Applied Science (ICEAS-3443), Sapporo, Hokkaido, Japan, 2015.7.20-22, pp. 51-57.
152.N.-J. Shih, A Three-Dimensional As-Built Data Based Comparison of the Temporary Urban Fixtures during Special Occasions, Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing, J. Kruis, Y. Tsompanakis and B.H.V. Topping, (Editors), Prague, 2015.9.1-4, pp. 1-7. (EI – Scopus)
153.Shih, Naai-Jung, Experiencing an Informal Dining Route through the 3D Scanned Data of Urban Fabric, The 4th Annual Conference on Engineering and Information Technology (2016 ACEAIT), March 28-30, 2016, Kyoto, Japan, pp. 421-428. (MOST 104-2221-E-011-131)
154.Chen-Yang Lin and Naai-Jung Shih, The Application of Simple Mobile Mapping and Fast 3D Modeling in Digital Conservation of Historical Buildings in China, The 31st International Conference on Computers and Their Applications (CATA-2016), 72-75, April 4-6, 2016, Las Vegas, Nevada, USA.
155.Naai-Jung Shih; Hwei-Chi Kuo; Chin-Fong Chang, 3D Scan for Special Urban Evening Occasion, 2016 International Conference on Applied System Innovation (IEEE ICASI 2016), May 28 – June 1, 2016, Okinawa, Japan, pp. 1-4. (EI, http://ieeexplore.ieee.org/abstract/document/75397
42/?reload=true&section=abstract )
156.Naai-Jung Shih; Chen-Ching Lin, Creating Urban and Architectural Details – Using 3D Scan and Photogrammetry, 2016 International Conference on Applied System Innovation (ICASI 2016), May 28 – June 1, 2016, Okinawa, Japan.
157.Naai-Jung Shih and Chin-Lin Lin, The Virtual 3D Representation of Old Railroad and Street of Jingtong, Proc. of Sixth International Conference On Advances in Civil, Structural and Mechanical Engineering (ACSM 2017), Bangkok, Thailand, Feb. 25-26, 2017, 27-30.
158.Naai-Jung Shih and Chin-Lin Lin, The Virtual 3D Representation of Old Street Culture of Jingtong, Proc. of International Conference on Sciences, Engineering and Technology Innovations ( ICSETI 2017), March 15-17, 2017, Taipei, Taiwan, 28-36.
159.Naai-Jung Shih, Pei-Huang Diao, & Wen-Tse Hsu, A Section-based Illustration of Old Street Fabric and 2nd Contour Using 3D Scan Data, Proceedings of CAD’19, Singapore, June 24-26, 2019, 49-53. DOI: 10.14733/cadconfP.2019.49-53.

JURY MEMBERSHIPS:
Computer-Aided Civil and Infrastructure Engineering, August 11, 2010
Automation in Construction 2017
Cities, 2016, 2018
UPPD conference 2018

HOBBIES:
wander around flea markets, pick up old staff and make something out of it, Gobi stones

REGISTRATION DATE:
2016-02-25 06:00:47

COUNTRY/REGION:
Taiwan (China)

ACCOUNT TYPE:
Academic

Awards received by Naai-Jung Shih


Conversations Stone Scenes

A' Design Award Winner for Fine Arts and Art Installation Design Category in 2017
Naai-Jung Shih for Naai-Jung Shih
Umbrella Earth Thematic Installation

A' Design Award Winner for Fine Arts and Art Installation Design Category in 2018
Naai-Jung Shih for Naai-Jung Shih
Hurricane Desktop Lighting Installation

Bronze A' Design Award Winner for Lighting Products and Fixtures Design Category in 2016
Naai-Jung Shih for Naai-Jung Shih
A Dream Tabletop Lighting Installation

Bronze A' Design Award Winner for Fine Arts and Art Installation Design Category in 2016
Naai-Jung Shih for Naai-Jung Shih
Life Lighting Installation

Bronze A' Design Award Winner for Fine Arts and Art Installation Design Category in 2016
Naai-Jung Shih for Naai-Jung Shih
Yulia Mariana Light Installation

Bronze A' Design Award Winner for Fine Arts and Art Installation Design Category in 2017
Naai-Jung Shih for Naai-Jung Shih
Sign Language Situational Display Stand

Bronze A' Design Award Winner for Fine Arts and Art Installation Design Category in 2018
Naai-Jung Shih for Naai-Jung Shih
Waterfall Architectural Component

Bronze A' Design Award Winner for Fine Arts and Art Installation Design Category in 2018
Naai-Jung Shih for Naai-Jung Shih
Ubiquitous Stand Desktop Interactive Display Stand

Silver A' Design Award Winner for Fine Arts and Art Installation Design Category in 2015
Naai-Jung Shih
Billy Julie Mask

Silver A' Design Award Winner for Fine Arts and Art Installation Design Category in 2016
Naai-Jung Shih for Naai-Jung Shih
Eyelash Stand Makeup Assistant

Silver A' Design Award Winner for Fine Arts and Art Installation Design Category in 2016
Naai-Jung Shih for Naai-Jung Shih
Eyes Flower Stand

Silver A' Design Award Winner for Fine Arts and Art Installation Design Category in 2017
Naai-Jung Shih for Naai-Jung Shih
Dancing Cubes Theme Installation

Silver A' Design Award Winner for Fine Arts and Art Installation Design Category in 2018
Naai-Jung Shih for Naai-Jung Shih
Moon Table Light

Silver A' Design Award Winner for 3D Printed Forms and Products Design Category in 2019
Naai-Jung Shih for Naai-Jung Shih
Falling Water Interactive Installations

Golden A' Design Award Winner for Fine Arts and Art Installation Design Category in 2017
Naai-Jung Shih for Naai-Jung Shih
Missing Julie Frame Installation

Golden A' Design Award Winner for Fine Arts and Art Installation Design Category in 2017
Naai-Jung Shih for Naai-Jung Shih
Vapor Breeze Tea Set

Golden A' Design Award Winner for Generative, Algorithmic, Parametric and AI-Assisted Design Category in 2018
Naai-Jung Shih for Naai-Jung Shih
Wood Storm Desktop Installation

Platinum A' Design Award Winner for Fine Arts and Art Installation Design Category in 2017
Naai-Jung Shih for Naai-Jung Shih

Runner-Up status designs by Naai-Jung Shih


Entangled Calendar Holder

Runner-Up for Fine Arts and Art Installation Design Category in 2020
Naai-Jung Shih for Naai-Jung Shih
Spinning Top Toy

Runner-Up for Fine Arts and Art Installation Design Category in 2021
Naai-Jung Shih for Naai-Jung Shih



SOCIAL
+ Add to Likes / Favorites | Send to My Email | Submit Comment | Comment | Testimonials | View Badges


 
design award logo

BENEFITS
THE DESIGN PRIZE
WINNERS SERVICES
PR CAMPAIGN
PRESS RELEASE
MEDIA CAMPAIGNS
AWARD TROPHY
AWARD CERTIFICATE
AWARD WINNER LOGO
PRIME DESIGN MARK
BUY & SELL DESIGN
DESIGN BUSINESS NETWORK
AWARD SUPPLEMENT

METHODOLOGY
DESIGN AWARD JURY
PRELIMINARY SCORE
VOTING SYSTEM
EVALUATION CRITERIA
METHODOLOGY
BENEFITS FOR WINNERS
PRIVACY POLICY
ELIGIBILITY
FEEDBACK
WINNERS' MANUAL
PROOF OF CREATION
WINNER KIT CONTENTS
FAIR JUDGING
AWARD YEARBOOK
AWARD GALA NIGHT
AWARD EXHIBITION

MAKING AN ENTRY
ENTRY INSTRUCTIONS
REGISTRATION
ALL CATEGORIES

FEES & DATES
FURTHER FEES POLICY
MAKING A PAYMENT
PAYMENT METHODS
DATES & FEES

TRENDS & REPORTS
DESIGN TRENDS
DESIGNER REPORTS
DESIGNER PROFILES
DESIGN INTERVIEWS

ABOUT
THE AWARD
AWARD IN NUMBERS
HOMEPAGE
AWARD WINNING DESIGNS
DESIGNER OF THE YEAR
MUSEUM OF DESIGN
PRIME CLUBS
SITEMAP
RESOURCE

RANKINGS
DESIGNER RANKINGS
WORLD DESIGN RANKINGS
DESIGN CLASSIFICATIONS
POPULAR DESIGNERS

CORPORATE
GET INVOLVED
SPONSOR AN AWARD
BENEFITS FOR SPONSORS
IMPRESSUM IMPRINT

PRESS
DOWNLOADS
PRESS-KITS
PRESS PORTAL
LIST OF WINNERS
PUBLICATIONS
RANKINGS
CALL FOR ENTRIES
RESULTS ANNOUNCEMENT

CONTACT US
CONTACT US
GET SUPPORT

Good design deserves great recognition.
A' Design Award & Competition.